Busbar processing machine construction

The main rotating machine of the bus processing machine engine, after the connecting rod is installed, can take up and down (reciprocating) movement of the connecting rod into a cyclic (rotating) motion. It is an important part of the engine. Its material is made of carbon structural steel or ductile iron. It has two important parts: the main journal, the connecting rod neck, and (among others). The main journal is mounted on the cylinder body, the connecting rod neck is connected with the connecting rod big hole, and the connecting rod small head hole is connected with the cylinder piston, which is a typical crank slider mechanism. The lubrication of the crankshaft mainly refers to the lubrication of the bearing bush between the rocker arm and the lubrication of the fixed points at both ends. This is generally pressure-lubricated. There is an oil passage in the middle of the crankshaft that communicates with each bearing. After the engine is running, the oil pump provides pressure to supply oil for lubrication and cooling. The working process of the engine is that the piston is ignited by the mixed compressed gas, pushes the piston to make a linear motion, and transmits the force to the crankshaft through the connecting rod, and the linear motion is converted into a rotary motion by the crankshaft. The rotation of the crankshaft is the power source of the engine. It is also the source of power for the entire bus processing equipment.